Fiebig Dewatering Machines
Overview.
The mixture of sand, grit and water is transported to the wheel by a suction dredger, an air pressure dredger, a floating grabber or a preparation plant. The solids store in the tub of the wheel and are transported by the wheel. The cups of the wheel are equipped with special synthetic screens with different column weights. The extended suction chambers create a natural vacuum, which reduces the dewatering grade to a minimum.
Installed in the tub are numerous adjustable overflow weirs. These weirs allow extraction or dropout of sublest sand. Our specialists are at your disposal for the construction of the dewatering wheels.
Dewatering wheel E 80 FS + E 150 FS
For recycling - water streaming device to clear out fine sand. The waste water with the fine sand is transported to the wheel.
E 150 FS, dewatered and delivered. The overflow water is stored in a tank and then added to the processing water by a pump.
Dewatering wheels E 120 FS and E 120 FSISA 10
Are charged by a suction dredger with two different sands are produced. In the first wheel the raw sand is dewatered and dumped. The overflow water with the fine sands is transported to the E 120 FSISA 10. In the
10 m long tube the finest particles sedimate and settle on the bottom of the tube and are transported to the wheel by the coil.
Charging of the Dewatering Wheel E 300 FS
By Suction dredgers and attached pivoting pump belt.
E300 FS
Mixture performance: 1600m³/h
Solid performance: 300m³/h
Driving performance: 11 kW
Fully automatic control by frequency control.
Pivoting dump belt
Axis-center-distance: 40 m
Belt breadth: 650 mm
Driving performance: 15kW
Pivoting radius 270°
Dropping height: 11 m
Pivoting drive: 3 kW
Fully automatic control of the traction drive by cord probe.
Fiebig Wet-screen plant for direct charging attached Dewatering wheel E300 FS
Charging over tight boxes, double-deck riddling machine for breakup of 2-32 mm. Cleaning of the grain 2-32 mm by Fiebig log-washer. The water-sand-mixture 0-2 is transported into a E300FS, the sand slugged and dewatered by the wheel body and is dumped by a pivoting heap belt.
E 120 FS
For dewatering of sand 0-2 mm out of an upstream classifier. With pivoting heap conveyor belt.
Mixture Performance: 8.000m³/h
Solid Performance: 1.000m³/h
Drive Performance: 37 kW
Fully Automatic control by frequency control.
Measurements:
Length 8 m
Width: 20m
Height: 3 m
The collecting conveyor belt GB 1000 mm, A-A 20 m charges a pivoting Heap Conveyor Belt GB 1000 mm, A-A 40 m for loading the raw material. Pivoting over 270 degrees.
Fiebig Dewatering wheel
E1000 FSIS 20
For direct charging of the suction dredger with attached riddling machine for separating at 90 mm.
E 300 FSISA 10
For direct charging of the suction dredger, fully automatic control by frequency transformation.
Mixture performance: 2.5000 m³/h
Solid Performance: 300 m³/h